|
|
Windows Error Code 611
'The route is not available.'
This is an IP routing error usually.
If you have installed any new pieces of software that affect routing/tcpip in anyway, doublecheck their documentation
as their purpose and affects.
Sometimes in some operating systems, once you make a tcp/ip change, you need to reboot the comptuer for the settings to
take effect. Reboot and try it again.
Check tcp/ip in the control panel, and make sure you only have one instance of tcp/ip for each component (1 for the
dialer/modem, and 1 for each ethernet card that you have), if you have extras doublecheck what they are for, but in
most instances, the duplicates can be safely removed.
Use winipcfg (for windows95/98) from the dos prompt, or ipconfig on windows 2000/2003/xp to check what network adapters
are installed, and that the ip's, subnet masks and gateways are for all the installed interfaces (ethernet cards,
dialup-modem adapters, and wireless ethernet cards. If there are duplicate ip's/gateways etc, you could cause issues,
if you aren't using your wireless ethernet card, and its a pcmcia wireless card, remove it and see if that helps.
If this happens while at work, talk to your helpdesk/network admins.
Last Updated February 13, 2005. by webmaster @modemhelp.org
|
|